Sometimes you just want to drop all the gain levels or fader levels. For example, when a kit is way too hot (I’m looking at YOU 8 bit kit), it might be nice to keep the relative gain positions but move all of the existing channel gains down a little. Ditto on faders. As it is, you have to adjust each individual knob or fader and there is a very good chance you’ll be changing the relative levels.
Select the group of channels you want in the mixer using the Shift/CMD keys and faders will retain their relative positions when you adjust one of the selected channels.
1 Like
Fender:
Sure enough that works with the faders, and also the sends. If they could just extend that to gain and trim I would be ecstatic!