# About multi out in DAW

**URL:** <https://forum.bfddrums.com/t/about-multi-out-in-daw/8127>\
**Category:** General Discussion\
**Created:** [November 8, 2024, 8:06am UTC](https://forum.bfddrums.com/t/about-multi-out-in-daw/8127 "2024-11-08T08:06:32Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![stephanevic](https://forum.bfddrums.com/letter_avatar_proxy/v4/letter/s/ecd19e/32.png) [@stephanevic](https://forum.bfddrums.com/u/stephanevic)\
**Post date:** [November 8, 2024, 8:06am UTC](https://forum.bfddrums.com/t/about-multi-out-in-daw/8127/1 "2024-11-08T08:06:32Z")

</div>

Good morning,  
When you want to configure the VST as a multi output, it is impossible to obtain the same sound as the single stereo output.  
Even by recreating the VST internal mixer configuration in my DAW.  
I did tests for the mono and stereo outputs with 3 dB compensation from the pass to the other.  
Is there a solution to have the original sound in multiple outputs?

---

<div class="post-metadata">

**Author:** ![Fender\_Bender](https://forum.bfddrums.com/user_avatar/forum.bfddrums.com/fender_bender/32/1036_2.png) [@Fender\_Bender](https://forum.bfddrums.com/u/Fender_Bender)\
**Post date:** [November 8, 2024, 2:19pm UTC](https://forum.bfddrums.com/t/about-multi-out-in-daw/8127/2 "2024-11-08T14:19:15Z")

</div>

I’ve never had an issue. You’re gonna have to provide some screenshots of both mixers (DAW+BFD3) and audio examples if possible. Is it just a question of volume difference, or the actual tone?

---

<div class="post-metadata">

**Author:** ![stephanevic](https://forum.bfddrums.com/letter_avatar_proxy/v4/letter/s/ecd19e/32.png) [@stephanevic](https://forum.bfddrums.com/u/stephanevic)\
**Post date:** [November 9, 2024, 2:42pm UTC](https://forum.bfddrums.com/t/about-multi-out-in-daw/8127/3 "2024-11-09T14:42:13Z")

</div>

hello,  
I’m going to take screenshots in the next post to show you but I’ve done new tests and and I noticed something:  
I rooted a single track (kick) on an individual track in the DAW. A stereo to be in the same configuration as the internal mixer of BFD Player (kick micro is sent to the internal “main” stereo track).  
If I choose the “main” output corresponding to stereo 1-2, the kick sounds the same, if I choose the next output 3-4, there is a difference. So I think that on main, we go first through the main track of the internal mixer and I suppose that the internal main is probably treated with eq and compression. Can anyone confirm this for me?

---

<div class="post-metadata">

**Author:** ![stephanevic](https://forum.bfddrums.com/letter_avatar_proxy/v4/letter/s/ecd19e/32.png) [@stephanevic](https://forum.bfddrums.com/u/stephanevic)\
**Post date:** [November 10, 2024, 10:11am UTC](https://forum.bfddrums.com/t/about-multi-out-in-daw/8127/4 "2024-11-10T10:11:28Z")

</div>

After a simple test I confirm that the internal “main” track includes processing. To see this, simply change the “main” output of each track to the following stereo output “3-4”.

---

<div class="post-metadata">

**Author:** ![Fender\_Bender](https://forum.bfddrums.com/user_avatar/forum.bfddrums.com/fender_bender/32/1036_2.png) [@Fender\_Bender](https://forum.bfddrums.com/u/Fender_Bender)\
**Post date:** [November 10, 2024, 3:34pm UTC](https://forum.bfddrums.com/t/about-multi-out-in-daw/8127/5 "2024-11-10T15:34:10Z")

</div>

I just realized that your post is for BFD Player, which I haven’t really delved into that much, so I don’t think I can offer much insight honestly. I haven’t messed with it since its public release.

---

<div class="post-metadata">

**Author:** ![stephanevic](https://forum.bfddrums.com/letter_avatar_proxy/v4/letter/s/ecd19e/32.png) [@stephanevic](https://forum.bfddrums.com/u/stephanevic)\
**Post date:** [November 11, 2024, 10:18am UTC](https://forum.bfddrums.com/t/about-multi-out-in-daw/8127/6 "2024-11-11T10:18:04Z")

</div>

Ok thank you for your interest.
